GDQ pneumatichigh vacuum angle valve is an electro-pneumatic valve controlled for turn on or shut off the vacuum airflow,the applicable media is air and non-corrosive gases.
It has two structures, one is (GDQ-J) angle type and another is (GDQ-S) a tee type within an ISO-KF or flange end pre-pump port.
Can design as customers’ requirement make with straight through type(GDQ-Z), normally the pneumatic cylinder is with a solenoid valve to control the flow direction; the signal feedback device like reed switch isoptionaldevice.
Scope Of Application |
105~6.7×10-5Pa(Rubber Shaft Seal) 105~6.7×10-7Pa(Bellows Shaft Seal) |
Valve Leakage Rate |
≤1.3×10-5Pa.L/S.(Rubber Shaft Seal) ≤1.3×10-7Pa.L/S.(Bellows Shaft Seal) |
Medium Temperature |
-25~+80ºC (NBR) -30~+150ºC (Viton) |
Air pressure |
0.4~0.6MPa |
Installation Status |
≤DN160 no requirement, Other specifications proposed upright installation |
Power Supply |
Generally:AC220V/50HZ Optional:DC24V、DC12V |
Body、Stem、Bonnet |
Carbon Steel、Stainless Steel |
Seal |
NBR、Viton、Bellows |