Mr. Chace Xiang
+86 (577) 86838999
+86 (577) 86911098
pioneertrade@163.com
chacepioneer
Pneumatic High Vacuum Angle Valve GDQ-S200
![]() |
![]() |
![]() |
![]() |
【Prev: Pneumatic High Vacuum Angle Valve GDQ-J25b】 |
|
【Next: Pneumatic Straight Angle Vacuum Valve GDQ-Z40b】 |
It has two structures, one is (GDQ-J) angle type and another is (GDQ-S) a tee type within an ISO-KF or flange end pre-pump port.
Can design as customers’ requirement make with straight through type(GDQ-Z), normally the pneumatic cylinder is with a solenoid valve to control the flow direction; the signal feedback device like reed switch isoptionaldevice.
Scope Of Application |
105~6.7×10-5Pa(Rubber Shaft Seal) 105~6.7×10-7Pa(Bellows Shaft Seal) |
Valve Leakage Rate |
≤1.3×10-5Pa.L/S.(Rubber Shaft Seal) ≤1.3×10-7Pa.L/S.(Bellows Shaft Seal) |
Medium Temperature |
-25~+80ºC (NBR) -30~+150ºC (Viton) |
Air pressure |
0.4~0.6MPa |
Installation Status |
≤DN160 no requirement, Other specifications proposed upright installation |
Power Supply |
Generally:AC220V/50HZ Optional:DC24V、DC12V |
Body、Stem、Bonnet |
Carbon Steel、Stainless Steel |
Seal |
NBR、Viton、Bellows |
If you have any enquiry about quotation or cooperation,please feel free to email us at pioneertrade@163.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
Subject: | |
---|---|
Message: | |
*Name: | |
*Email: |
(Please make sure your E-mail address is correct otherwise the recipient will not be able to reply.) |
Tel: |
(Please make sure your Business Phone is correct otherwise the recipient will not be able to reply.) |
Fax: | |
Address: | |
|